Komplety

E3D RapidChange Revo™ ObXidian Nozzle 0,6 mm

Revo ObXidian is E3D's latest abrasive resistant Revo Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles.Key Features:Material: Copper/Hardened...

Novinka v naší nabídce

E3D RapidChange Revo™ CR HeaterCore 12V

This is a special Revo HeaterCore intended for use with the Revo CR. It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving you the hassle of any firmware changes to your Creality 3D printer.

Novinka v naší nabídce

E3D RapidChange Revo™ CR - 1.75mm, 12V Fully Loaded Nozzle Kit

Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

Novinka v naší nabídce

E3D RapidChange Revo™ Hemera XS - 1.75mm, 12V Single Nozzle Kit

Revo Hemera XS is a compact dual-drive extrusion system. It’s 92g lighter and 11mm shorter than classic Hemera, so it can move faster on your 3D printer’s motion system with less inertia, reducing print artefacts such as ghosting. A specially designed heatsink makes it compatible with Revo Nozzles, and with the addition of a Hemera HeatBreak (sold separately) it works with the E3D V6 ecosystem,...

Novinka v naší nabídce

E3D RapidChange Revo™ Micro - 1.75mm, 12V Fully Loaded Kit

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room...

Novinka v naší nabídce

E3D RapidChange Revo™ Voron - 1.75mm, 12V Single Nozzle Kit

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!

Novinka v naší nabídce

E3D RapidChange Revo™ Voron - 1.75mm, 12V Fully Loaded Nozzle Kit

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!

E3D RapidChange Revo™ Hemera - 1.75mm, 12V Single Nozzle Kit

Revo Hemera is a compact, powerful extrusion system with the convenience of E3D’s RapidChange Revo ecosystem. With dual drive gears and hardened steel hobbs to grip filament from both sides, Revo Hemera gives your 3D printer exceptional pushing force. A tightly constrained filament path means material can’t flex and bend on its way to the melt zone, making it a top choice for challenging 3D...

E3D RapidChange Revo™ Brass 1.75mm 0.4mm Nozzle

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...

E3D RapidChange Revo™ Brass 1.75mm 0.6mm Nozzle

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...

E3D RapidChange Revo™ Brass 1.75mm 0.8mm Nozzle

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...

E3D RapidChange Revo™ Brass 1.75mm 0.4mm Triple Nozzle Pack

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...

Novinka v naší nabídce

IEMAI vyhřívací kostka s tryskou - set

Set pro vysokoteplotní tiskárnu Magic M obsahuje vyhřívací kostku, trysku, topné těleso, senzor a konektor.

Novinka v naší nabídce

IEMAI tisková hlava odnímatelná HT

Odnímatelná tisková hlava pro vysokoteplotní tiskárny IEMAI Magic M.

Novinka v naší nabídce

Hotend pro 3D tiskárnu Bambu Lab

Vysokoteplotní hotend pro 3D tiskárnu Bambu Lab.