Náhradní díly
-
E3D RapidChange Revo™ Brass 1.75mm Variety Nozzle Pack
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
1989 Kč
-
E3D RapidChange Revo™ HeaterCore 12V
The Revo HeaterCore is a heating and sensing architecture for E3D’s RapidChange Revo ecosystem. It combines a powerful heater and temperature probe into a convenient, compact package.
Na objednávku (10000 ks)
979 Kč
-
E3D RapidChange Revo™ Spring Triple Pack
These retention springs clip onto your Revo HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo Hemera. The spring keeps the HeaterCore firmly attached to the cold side, while pushing it into the nozzle for improved thermal conductivity.
Na objednávku (10001 ks)
79 Kč
-
E3D RapidChange Revo™ Six - 1.75mm, 24V Fully Loaded Kit
Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at...
Na objednávku (10001 ks)
4139 Kč
-
E3D RapidChange Revo™ Six - 1.75mm, 24V Single Nozzle Kit
Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at...
Na objednávku (10000 ks)
2619 Kč
-
E3D RapidChange Revo™ Brass 1.75mm 0.25mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
E3D RapidChange Revo™ HeaterCore 24V
The Revo HeaterCore is a heating and sensing architecture for E3D’s RapidChange Revo ecosystem. It combines a powerful heater and temperature probe into a convenient, compact package.
Na objednávku (10000 ks)
979 Kč
-
E3D Revo™ Prusa MK3 Edition - 1,75 mm - 24V - Fully Loaded Kit
Revo Six Prusa Edition is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same filament diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore wires, and...
Na objednávku (10000 ks)
4139 Kč
-
E3D RapidChange Revo™ Hemera XS - 1.75mm, 12V Fully Loaded Nozzle Kit
Revo Hemera XS is a compact dual-drive extrusion system. It’s 92g lighter and 11mm shorter than classic Hemera, so it can move faster on your 3D printer’s motion system with less inertia, reducing print artefacts such as ghosting. A specially designed heatsink makes it compatible with Revo Nozzles, and with the addition of a Hemera HeatBreak (sold separately) it works with the E3D V6 ecosystem,...
Na objednávku (10001 ks)
7339 Kč
-
E3D Revo Extension Cable Kit
Spare extension cables for your Revo HotEnd.
Na objednávku (10001 ks)
199 Kč
-
E3D RapidChange Revo™ Brass 1.75mm 0.15mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
E3D RapidChange Revo™ ObXidian Nozzle 0,4 mm
Revo ObXidian is E3D's latest abrasive resistant Revo Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles.Key Features:Material: Copper/Hardened...
Na objednávku (10001 ks)
1719 Kč
-
E3D RapidChange Revo™ ObXidian Nozzle 0,6 mm
Revo ObXidian is E3D's latest abrasive resistant Revo Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your Brass Nozzles.Key Features:Material: Copper/Hardened...
Na objednávku (10001 ks)
1719 Kč
-
E3D RapidChange Revo™ CR HeaterCore 12V
This is a special Revo HeaterCore intended for use with the Revo CR. It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving you the hassle of any firmware changes to your Creality 3D printer.
Na objednávku (10001 ks)
979 Kč
-
E3D RapidChange Revo™ CR - 1.75mm, 12V Fully Loaded Nozzle Kit
Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.
Na objednávku (10001 ks)
4139 Kč