Popis
Buy EasyPrint PETG filament from PrimaCreator for your 3D printer and get an extremely tough, durable and versatile material. This filament has high impact strength, good flexibility and very low material shrinkage. Thanks to its material properties, this PETG filament can be easily processed on many FFF/FDM 3D printers.
Material properties of EasyPrint PETG filament:- High-quality PETG filament for your 3D printer
- Achieve impressive surfaces with a noble look – Depending on the color or wall thickness transparent or slightly translucent
- EasyPrint PETG filament is easy to process in a wide temperature range
- High material quality and perfect spooling of material on each roll
Basic Data Printing Parameter
| Filament Typ | PETG |
| Diameter | 1,75 mm |
| Tolerance | 0,05 mm |
| Weight | 0,50 kg |
| Lenght | 164 m |
| Color | transparent |
| Recomended Printing Temp Min | 210 ºC |
| Recomended Printing Temp Max | 235 ºC |
| Recomended Printbed Temperature Min | 0 ºC |
| Recomended Printbed Temperature Max | 60 ºC |
| Recomended Printing Speed Min | 15 mm/s |
| Recommended Printing Speed Max | 100 mm/s |
| Recomended Fan Speed Min | 10 % |
| Recomended Fan Speed Max | 100 % |
| Recomended Retraction Min | 1,5 mm |
| Recomended Retraction Max | 5 mm |
| Recomended Flow Rate Min | 100 % |
| Recomended Flow Rate Max | 105 % |
| General | |
| Specific gravity | 1,27 g/cm3 ASTM D1505 |
| Mold Shrinkage | 0.2 - 0.5 ASTM D955 |
| Temperature | |
| Vicat softening temp | 83 °C ASTM D1525 |
| Tensile | |
| Tensile strength | 53 MPa ASTM D638 |
| Tensile modulus | 2150 MPa ASTM D790 |
| Elongation | |
| Elongation at yield | 5 % ASTM D638 |
| Elongation at break | 70 % ASTM D638 |
| Flexural | |
| Flexural Strenght | 80 % ASTM D790 |
| Other | |
| Impact Strength | ,09 KJ/m2 ASTM D256 |
Doplňující informace
| Kategorie: | PETG |
| Barva: | transparentní, zelená, modrá |
| Váha materiálu: | 2 kg |
EasyPrint PETG Value Pack - 1.75mm - 4x 500 g (Total 2 kg) - Clear, Rose, Light Blue, Green
1209 Kč